Manx SA7x Guía de instalación descargar pdf (Pagina 33)

Unpacking and Repacking a DECArray300

Storage Array

2.1 Unpacking and Placing the Storage Array

Before unpacking and placing the Sx300 storage array, make sure that the

site is ready to receive the array. Refer to Chapter 1 for site preparation

information and for array speciﬁcations.

This chapter describes the steps to perform the following:

• Correctly unpack the Sx300 storage array (Section 2.1.1)

• Remove the Sx300 storage array from the shipping pallet (Section 2.1.2)

• Place the Sx300 storage array with the host system (Section 2.1.3)

• Level the Sx300 storage array (Section 2.1.4)

• Inspect the Sx300 storage array before installation (Section 2.1.5)

2.1.1 Unpacking the Storage Array

The Sx300 storage array is packed in a cardboard carton attached to a wooden

shipping pallet and sealed in a barrier bag with desiccant for environmental

protection.

NOTE

Before beginning to unpack the equipment, inspect the shipping carton

for signs of external damage. Report any damage to the local carrier

and either Digital

™

Customer Services or the Digital sales ofﬁce.

Unpacking and Repacking a DECArray300 Storage Array 2–1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 319 320

Sin comentarios

Manx SA7x Guía de instalación Pagina 33