Manx SA7x Guía de instalación descargar pdf (Pagina 273)

Converting a Single-Host Conﬁguration to

a Dual-Host Conﬁguration

This appendix describes how to convert an Sx300 storage array, Sx72 storage

enclosure, or magazine tape subsystem that is conﬁgured according to

single-host conﬁguration guidelines to dual-host conﬁguration guidelines.

Make sure that you have the following before starting any procedure:

• A #1 Phillips screwdriver (part number 29–11001–00)

• A 1/8-inch hex key (part number 29–26115–00)

• The KFMSA Module Installation and User Manual (EK–KFMSA–IM)

• The SF Family Label Booklet (part number 36–32882–01)

Additional Cables required

You need in addition for every SF7x a cable kit (CK-SF200-LM) .You

need in addition for every tape loader magazine, which isn’t connected

to a SF7x device an additional cable kit (CK-SF200-LM).

WARNING

Only one Sx72 storage enclosure inner assembly should be extended on

the slide mount at a time.

Take all possible ESD precautions when performing this procedure.

Wear a correctly grounded ESD strap.

Perform each step in the order presented.

Converting a Single-Host Conﬁguration to a Dual-Host Conﬁguration C–1

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 319 320

Sin comentarios

Manx SA7x Guía de instalación Pagina 273