Manx SA7x Guía de instalación descargar pdf (Pagina 150)

5.4 Labeling the DSSI Cables and OCP

Label Colors Connections

Blue Port 1, SF1, SF3, TF1

Red Port 2, SF2, SF3, TF2

Yellow Port 3, SF4, SF6, TF3

green Port 4,SF5, SF6, TF4

For a dual-host conﬁguration, use the following colored labels on the SF7x OCP

door, magazine tape subsystem front panel, and all DSSI cables:

Label Colors Connections

Blue Port 1, SF1, TF1, port 7

Red Port 2, SF2, TF2, port 8

Yellow Port 3, SF3, TF3, port 9

Green Port 4, SF4, TF4, port 10

Blue with white strip Port 5, SF5, port 11

Red with white strip Port 6, SF6, port 12

5.4.1 Filling Out the Labels

Follow the steps on the inside of the SF Family Label Booklet (part number

36-32882-01) to ﬁll out the labels for the DSSI cables and SF7x operator control

panels.

Proceed once you have ﬁlled the cable and OCP labels.

5.4.2 Labeling the Cables

For each cable you just installed, place a label 2 inches behind the connector as

shown in Figure 5–18.

5.4.3 Labeling the OCP

For each OCP on each SF7x you installed, place a label as shown in

Figure 5–19.

5–44 Installing the SF7x Storage Enclosure in an Sx300 Storage Array

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 319 320

Sin comentarios

Manx SA7x Guía de instalación Pagina 150